.

ACCESSORIES FOR SZE2 CABINETS - VENTILATING, COOLING AND HEATING

Heater

Compact heat device equipped with fan.

Technical data

  • Power supply: 230 V AC 50-60 Hz
  • Heating force: 200/400 W
  • Fan capacity 10 m3 /h
  • Protection degree . IP 20
  • Dimensions . 71x70x95 mm

Features:

  • 2 power ranges depending on how connect the power cord,
  • independent power supply circuit of the fan.

Scope of delivery:

  • heater,
  • DIN rail,
  • two holders,
  • screw clamps for connecting power cords.

Thermostat

Thermostatic regulator indicated for controlling fans, heaters, heat exchanger or for attaching signal generator at exceeding preset temperature limits.

Technical data

  • Sensor element: thermal bimetal
  • Temperature range: 0-60 °C, hysteresis ca. 7 °C
  • Contact types: snap action contact
  • Power carrying capacity: 6 A (1) 250 V AC
  • Radio frequency interference: N (according to VDE 0875)

Scope of delivery:

  • thermostat,
  • DIN rail,
  • cable,
  • two holders,
  • two clamps.
Type of thermostat Colour of handwheel Catalogue number
Normally closed
Switches off devices (e.g. eaters)
at selected temperature limit.
RED WN-0201-01-00-000/A
Normally open
Switches on ventilation system (e.g. fans)
at selected temperature limit.
BLUE WN-0201-02-00-000/A
Termostat zamykający

Filter fans and exhaust filters

  • Intended for mounting in side panels and door of the cabinet.
  • Fastened with latches and screws.
  • Enclosure made of ABS material, light grey (RAL 7035).
  • Equipped with high quality filter inserts and gaskets.
  • Possibility of changing direction of air flow by turning the fan.

Type of fan supply
230 V AC (50/60 Hz)
On request: 115 V AC (50/60 Hz) or 24 V DC

Protection degree
IP 54 in accordance with EN 60529

Selection of filter fans and exhaust filters should be consulted with ZPAS customer service.

EXHAUST FILTER

Air conditioner and heat exchanger

On customer’s request, SZE2 cabinets can be equipped with an air conditioner or heat exchanger (air/air type) fixed on the doors, side panels or in the top plate.

Mode of operation
Internal cabinet air is sucked up from the top, cooled inside the air conditioner or heat exchanger and returned the cabinet at a high speed towards the bottom. This solution ensures optimum cooling of the entire cabinet.

Protection degree Air conditioners and heat exchangers in standard ZPAS offer have IP 54 protection degree.

AVAILABLE TYPES OF AIR CONDITIONERS

Side/door-mounted

PROTHERM Indoor

  • basic series of air conditioners
  • 330-4000 W cooling power
  • designed for mounting on cabinet side panel or door

SLIM

  • or applications where flat air conditioner is required
  • 500-3000 W cooling power
  • designed for mounting on cabinet side panel or on cabinet door

PROTHERM Outdoor

  • or use outdoors
  • 550-4000 W cooling power
  • two mounting options: outside or inside a cabinet
  • optional built-in heater

Roof-mounted

TOP

  • mounted on cabinet roof
  • 330-5200 W cooling power
  • most models equipped with triple condensate protection system

Modular

MODULE

  • for cabinet sets, mounted on the side of a cabinet with a depth 600 or 800 mm
  • 5800-10000 W cooling power
  • all models with electronic control

Selection of the air conditioner or heat exchanger should be consulted with ZPAS customer service.