.

19" FRAME AND FIXING ACCESSORIES

Elements of 19" rack frame

1a. 19" mounting profile (rack rail), type STANDARD, 15 mm deep
1b. 19" mounting profile (rack rail), type PREMIUM, 12 mm deep
2. Middle mounting profile, type STANDARD, 12 mm deep
3a. C-profile for 15 mm deep mounting profiles
3b. C-profile for 12 mm deep mounting profiles
4. Outrigger
5. Guide bar
6. Cross bar

Mounting profiles

For installing 19" equipment in cabinets: SZB IT, DSR IT, SZE2 PC. In cabinets 600 mm wide, mounting profiles are fixed directly to the C-profiles; in cabinets 800 mm wide, in order to achieve 19" spacing, it is necessary to use outriggers.

Notes: Only 15 mm deep mounting profiles may be used in SZE2 PC cabinets.

Material
Al-Zn coated sheet steel

Scope of delivery
Mounting bar or mounting angle without fixing accessories.
(Fixing accessories should be ordered separately.)

Package: 1 pc.

C-profiles

For fixing mounting profiles, mounting angles, cable ducts and cable trays in SZB IT and DSR IT cabinets.
Available in two versions with different depths:
- 18 mm deep C-profiles for fixing mounting profiles with a depth of 15 mm,
- 21 mm deep C-profiles for fixing mounting profiles with a depth of 12 mm.

Material
Al-Zn coated sheet steel.

Scope of delivery
Set of 2 C-profiles with fixing accessories for assembling into the cabinet.

Package: 2 pcs.

Outrigger

For fixing mounting profiles in 800 mm wide SZB IT, DSR IT and SZE2 PC cabinets, in order to achieve 19" spacing.
Depending on the cabinet design, two or three outriggers are required for assembling one mounting profile.

Material
zamak casting

Scope of delivery
One outrigger with fixing accessories to install the outrigger to mounting profile/angle and to C-profile.

Package Cataalogue number
1 pc. WZ-5205-90-00-C12

Fixing accessories

Set description Package Catalogue number
Elements for fixing one mounting profile to 600 mm wide SZB IT, DSR IT
or SZE2 PC cabinet (without outrigger):
Flange bolt M6x12 - 3 pcs
Flange nut M6 - 3 pcs
1 set WZ-8059-Z1-01-000
Elements for fixing appliances to the mounting profiles:
Screw M6x16 - 10 pcs.
Cage nut M6 - 10 pcs.
Plastic washer - 10 pcs.
1 set T1Z-00-0002

Guide bar

Fixed horizontally to the front and rear 19" mounting profiles, parallel to the cabinet’s side. For supporting appliances in the cabinet. With oblong holes measuring 6.5 x 22 mm.

Material
Zinc-coated sheet steel

Scope of delivery
Guide bar with fixing accessories.

Package: 1 pc.

Adjustable guides

Fixed horizontally to the front and rear 19" mounting profiles, parallel to the cabinet’s side. For supporting appliances in the cabinet. With oblong holes measuring 12.5 x 25 mm.

Material
Set of two adjustable guides with fixing accessories for mounting in the cabinet.

Lenght L [mm] Catalogue number
350-600 WZ-8672-20-01-000
550-900 WZ-8672-20-02-000
850-1150 WZ-8672-20-03-000

Package: 1 set

Cross bar

Fixed to the rear mounting profiles in 19" cabinets.
For installing cables or supporting appliances in the cabinet.
With holes for M6 bolts.

Material
Zinc-coated sheet steel

Scope of delivery
Cross bar with fixing accessories.

Copper earthing bar

For SZB IT or DSR IT cabinets, as an alternative for the factory-installed galvanized steel earthing bar.

Material
Copper

Scope of delivery
Earthing bar with screws for assembling in the cabinet

Earthing cable set

Insulated copper cables for joining removable elements of the cabinet with earthing bar.
Equipped with contact eyes Ø 6 mm.

Material
Copper cables 6 mm2

Scope of delivery
Earthing cables are sold in sets in accordance with the chart
below.