Mounting bars system - SZE2 system...

Mounting bars system - SZE2 system cabinets

System belek montażowych - Szafy systemowe SZE2

.

ACCESSORIES FOR SZE2 CABINETS - 19" MOUNTING PROFILES SYSTEM

19" rack construction methods

19" rack in a cabinet with a width of 600 mm

1. 19" mounting profile
2. Mounting bar UNI

19" rack in a cabinet with a width of 800 mm

1. 19" mounting profile
2. Mounting bar UNI
3. Outrigger

Used fixing accessories:
WZ-1951-44-01-000 - M6x16 self-forming screws
WZ-SB00-37-04-000 - fixing accessories for mounting profiles

19" mounting profile

Used for installing 19" equipment in cabinets 600 or 800 mm wide. They are fixed to the cabinet’s frame by using mounting bars UNI; in order to achieve the 19" spacing in cabinets 800 mm wide it is necessary to use outriggers, while in cabinets 1000 and 1200 mm wide an individual rack made of mounting bars UNI.

Material
Al-Zn coated sheet steel

Scope of delivery
Mounting profile without fixing accessories.

Technical data
Length of mounting profile [mm]
[U=44,45 mm]
Catalogue number
2089
47 U
WZ-1718-97-20-000
1867
42 U
WZ-1718-97-02-000
1778
40 U
WZ-1718-97-03-000
1734
39 U
WZ-1718-97-13-000
1689
38 U
WZ-1718-97-04-000
1600
36 U
WZ-1718-97-05-000
1467
33 U
WZ-1718-97-14-000
1422
32 U
WZ-1718-97-06-000
1334
30 U
WZ-1718-97-15-000
1245
28 U
WZ-1718-97-07-000
1200
27 U
WZ-1718-97-16-000
1067
24 U
WZ-1718-97-08-000

Package: 1 pc.

Outrigger

For fixing mounting profile in SZE2 cabinet 800 mm wide.

Material
Zamak casting

Scope of delivery
1 outrigger with fixing accessories for fastening to mounting profile and mounting bar UNI.

19" transverse bar

For installing devices on 19" mounting profiles or 19" swing frame.

Material
Al-Zn coated sheet steel

Scope of delivery
19" transverse bar without fixing accessories (fixing accessories: cat. no WZ-1951-44-02-000).

Rack construction methods - mounting bars system

CLASSIC system

1. Mounting bar CLASSIC
2. Cross bar CLASSIC
3. Vertical bar CLASSIC

UNI system

5. Mounting bar UNI
6. Angle-element for joining mounting bars UNI

*) Fixing accessories are sold in sets 20 pcs/1 set.

Mounting bar CLASSIC

Fixed to cross bars or vertical bar.

Material
Al-Zn coated sheet steel

Scope of delivery
Mounting bar without fixing accessories

MATCHING MOUNTING BAR CLASSIC TO CABINET’S WIDTH

Cross bar CLASSIC

Fixed to vertical or horizontal slots of the cabinet’s frame.

Material
Al-Zn coated sheet steel

Scope of delivery
Cross bar without fixing accessories

Package: 1 pc.

Vertical bar CLASSIC

Fixed to the bottom and top plate of the cabinet’s frame.

Material
Al-Zn coated sheet steel

Scope of delivery
Vertical bar without fixing accessories

Technical data
For cabinet height [mm]
Vertical bar lenght [mm]
Catalogue number
2200
2075
WZ-1951-48-05-000
2000
1875
WZ-1951-48-01-000

Package: 1 pc.

Mounting bar UNI

Mounting bars UNI enable configuration of any rack inside
the cabinet.
Slots in the bars are adjusted both for horizontal and vertical slots of the cabinet’s frame.
The standard offer includes bars whose length is adjusted to the cabinet’s dimensions (see the chart below). Other lengths of bars are available on customer’s request.
It is possible to select the length of bar individually by cutting bars during the assembly.

Material
Al-Zn coated sheet steel

Scope of delivery
Mounting bar without fixing accessories.

Package: 1 pc.

Methods of fastening bars in the cabinet (look at page 156):
1) Indirect fastening by bars cat. No from WZ-1951-19-05-000 to  WZ-1951-19-08-000.
2) Direct fastening to the bottom or top plate.
3) Direct fastening to the cabinet’s posts.

Angle element for joining mounting bars UNI

Material
Al-Zn coated sheet steel

Scope of delivery
1 angle element without fixing accessories

Fixing accessories for CLASSIC and UNI bars

They are sold in sets of 20 pcs. each.

Shelves

Mounted directly to the cabinet’s frame.
Material
Steel sheet powder painted in light grey (RAL 7035)
Scope of delivery
Shelf without fixing accessories.