Z-SERVER server cabinet


Z-SERVER server cabinet

Z-SERVER server cabinet

More Views

 
Description Specification Configurator Accessories Connected
STABLE STRUCTURE
Acceptable static load 1500 kg.

MULTIPURPOSE
Smooth tool-free adjustment of 19" mounting profiles.
Mounting profiles are U-marked to simplify installation.
The width can be changed from 19’’ to 21’’ with no need to use additional mounting elements.*
Door opening angle up to 270 degrees, adjustable direction of opening.
Easy installation thanks to split side panels.
Optional mounting of partitions between cabinets at any time of their operation.
Tool-free mounting of grounding cables to cabinet components.
Tool-free mounting of the top plate of cabinet.

SAFETY
5-point cabinet lock system.**
Locks with access control are available.

PERFORMANCE
Doors with optimum perforation spacing of 80%.
Up to 86% of the door area is perforated to provide adequate cooling for the installed devices.
To optimise the flow of cold air we provide the following components
to isolate cold and hot areas at the cabinet and Z-SERVER BOX server room.

Z-SERVER SYSTEM
The new Z-SERVER cabinet system represents innovative quality solutions for data-processing centres. Scalable functionality and easy adaptation enabled by the available additional equipment:
• Z-SERVER BOX cold aisle installation,
• air flow guiding elements within a single cabinet,
• logical cabling arrangement elements,
• power supply system mounting elements.

* Change of width from 19 to 21 inches is available only for 800 mm wide cabinets.
** The 5-point lock system is available for single-leaf doors with a standard swing handle.

Configurator

Z-SERVER cabinet scope of delivery:
- cabinet frame with the selected overall dimensions,
- single-leaf front door with perforation, selected rear door type, without side panels,
- two pairs of 19" mounting profiles, top plate of the cabinet,
- cabinet painted in the selected colour.
Information on the available types of side panels and accessories can be found further in the folder.


Z-SERVER CABINET ACCESSORIES

SIDE PANELS


Available in four versions: A, B, C, D.
Version A: door can be opened up to 270 degrees.
Version B: provides sufficient mounting space in 600 mm wide cabinets. Enables the installation of a power strip between the side panel and the 19” mounting profile.
Version C: partition between cabinets (cabinets with feet).
Version D: partition between cabinets (cabinets without feet).

ROD LATCH


For doors with ZPAS access control.

19" CENTRAL MOUNTING PROFILE




VERTICAL AND HORIZONTAL MASKING PANELS


Vertical masking panels
For sealing the area between the 19" space and the cabinet side panel. The panels prevent the recirculation of hot air to the front area of the cabinet, and increase the efficiency of air conditioning systems.
In case of 800 mm wide cabinets the panels include an opening for cable claps and 1U cable grommets for the installation of other equipment. Vertical masking panels are mounted on 19" mounting profiles without the use of tools.
Horizontal masking panels
For sealing the area between the 19" space and the top and bottom plate of the cabinet. The panels prevent the recirculation of hot air to the front area of the cabinet, and increase the efficiency of air conditioning systems. Horizontal masking panels are attached to the vertical panels.


19" CABLE TRAYS


Mounted between 19" mounting profiles. Made of plastic. Available in 1U and 2U heights. Compliant with high-density cabling cabinets.

VERTICAL CABLE TRAY


Vertical cable tray
For 800 mm wide cabinets. For arranging high-density cabling in the vertical direction. Mounted on a 19" mounting profile without the use of tools.
Vertical cable comb
Dla szaf o szerokości 600 mm i 800 mm. Przeznaczony do organizacji pionowej okablowania. Montowany jest beznarzędziowo do profilu montażowego 19''.

VERTICAL AND HORIZONTAL ARRANGEMENT PIECE


Intended for:
- arrangement of logical cabling,
- arrangement of power supply cables,
- mounting of power distribution strip and other accessories.
The arrangement pieces are mounted on the cabinet frame.

BRUSH STRIP


For Z-SERVER cable top plate.

POWER STRIP BRACKET


For mounting ZPAS power strips to 19" onto mounting profiles and vertical arrangement pieces. Tool-free mounting.

 
 
COLD AISLE INSTALLATION
The Z-SERVER BOX solution physically separates the air distributed by air conditioners and the hot air generated by operating equipment.
Z-SERVER BOX optimises the usability of the data centre infrastructure.

COLD AISLE SLIDING DOOR


Opened along the entire width of the aisle. Made of aluminium profiles. Translucent pane made of toughened glass.

COLD AISLE RAISED ROOF


Roof module with a height of 150 mm. The roof frame is made of sheet metal. Its transparent sections are made of polycarbonate. The top transparent element of the module is tilt-mounted and can be installed without the use of tools. Modular design simplifies expansion.

CABINET CONNECTION SET




Attribute Value
Catalogue number z-server


Page ID: z-server